Showing all 22 results

  • Sale!

    Ashdown Peacemaker 40

    $1,299.00 $799.00

    Input: Impedance 1M Ohm, Input range 100mV to 1V p-p
    Effects Return: Impedance 50k Ohms, Input level 0dBu nominal
    Effects Send: Impedance 10k Ohms, Level 0dBu nominal
    Bass, Middle, Treble: Traditional passive interactive tone control network provides classic guitar tonal adjustment
    Output Tubes: 4 x EL84 (6BQ5)
    Bias: Class 'A' auto-bias
    Output Power: 40 Watts RMS into 16 Ohms
    Power Requirements: 80 Watts @ rated supply voltage

  • BadCat Cub II R


    15 Watt
    Volume, Treble, Bass, Tone Bypass Switch, Cut, Reverb, Push-Pull Master Volume
    EL84 Power
    12zx7 Pre Amp
    Dimensions: 19″H x 24″ x 10.5″ D
    Weight: 51 Lbs.

  • Sale!

    Bag End D10BX-D

    $1,150.00 $975.00

    Electric Bass Guitar
    Acoustic Bass Instruments
    Chapman Stick
    System Type:
    2-way rear vented 2.9 ft3
    Enclosure: 3/4” 13-ply solid hardwood core plywood
    Finish:Deep Red Carpet
    Grille: 16 Gauge black power coated perforated steel
    Low Frequency Components:
    Transducers, 2 – 10” cones
    High Frequency Components:
    Transducer, 1 – 2” Titanium diaphragm,
    Compression driver
    Input Connector: Neutrik speakon 1/4” combo jack
    2 – Handles
    8 – Protective corners
    Crossover Type:
    Passive filter type @ 3.7 kHz
    100 dB SPL (2.83 V @ 1m)
    Frequency Response:
    42 Hz to 16 kHz ±6 dB
    Power Handling:
    400 W continuous (IEC)
    800 W program
    Recommended Amplifier Power:
    400 to 800 W at rated impedance
    Rated Impedance:
    4 Ohms
    A positive asymmetrical signal applied to the +
    terminal will result in a positive asymmetrical
    acoustical pressure
    18.5”h x 22.5”w x 18.5”d
    47 cm x 58 cm x 47 cm
    75 lbs
    35 k

  • Fender Acousticsonic


    Dual 40W amplifiers
    Dual 8″ foam-surrounded LF drivers
    HF tweeter
    Ideal for acoustic-electric instruments and vocals
    Mic and instrument channels have independent EQs
    Phase switch controls feedback
    String Dynamics control reins in harsh treble
    Phantom power on mic channel
    Line out lets you go direct to a mixer
    DSP effects
    Optional footswitch controls effects switching on both channels
    Tilt-back legs for better projection
    22-1/2″W x 16-1/2″H x 10-1/4″D
    43 lbs.

  • Holland Custom Acoustic Amplifier


    Custom Made
    One of A Kind
    Tube Power
    Hand Wired
    12″ Speaker

  • Holland Jimmi

  • Marshall JCM2000 TSL 100 Stack


    3 independent channels with volume, EQ, and gain
    100W all-tube power
    Spring reverb
    Speaker emulation DI circuit
    2 effects loops
    4 — 12″ heavy-magnet drivers
    Slant-front cab
    Marshall excellence

  • Matchless

  • Matchless Chiefton Sampson Era Custom Color


    Power: 40 Watts
    Channels: 1
    Controls: Volume, Bass, Mid, Treble, Brilliance, Master Volume, Reverb
    Switches: 3 Position rotary impedance
    Power Tubes: 2 x EL34
    Preamp Tubes: 5 x 12AX7
    Rectifier Tube: 1 x 5AR4
    Effects: Effects Loop, Standard Reverb
    Speaker Output: 4, 8 and 16 Ohms
    Weight: 85 lbs.
    Dimensions: 21 x 27 x 10.5

  • Mesa Boogie DC-5 Combo


    Tube preamp (12AX7) + tube amp (2 x 6L6, 50W).
    Front panel: 1 guitar input, 1 footswitch input
    Back panel: effects loop (send+return) with wet/dry mix. 1 auxiliary speaker output
    Independent channels (rhythm, lead), each with the same controls:
    Gain, Treble, Mid, Bass, Volume,Presence, Reverb.
    Common to both channels:
    5-band EQ
    Master controls

  • Roland Jazz Chorus JC-120 USA


    JC-120 Jazz Chorus Amp
    Dimensions: 30″W x 24-1/2″H x 11-1/4″D
    Weight: 62 lbs.
    Output: 120W (60W + 60W)
    Speakers: 2×12″
    Controls (front):
    Channel 1: Bright on/off, volume, treble, middle, and bass
    Channel 2: Bright on/off, volume, treble, middle, bass, distortion,
    reverb, vibrato speed, vibrato depth, chorus; on/off, and vibrato
    Controls (rear):
    Channel 2: effect loop serial/parallel
    Effect level: +4dBm/-10dBm
    Rear jacks:
    Chorus/vibrato footswitch
    Reverb footswitch
    Distortion footswitch
    Channel 2 effect loop send/effect loop returns (L/R)
    Made in USA

  • Speedster

  • Speedster Soldano Signed


    Michael Soldano Signature Speedster AD21000-PT Speaker and Cab Combo Amplifier in Hot Rod Yellow. Made in the USA Hand built, custom shop created, low serial number, signed by M. Soldano himself. This is a high end boutique amp, with an adjustable bias for either of the two 6V6s that power it. It's rated at 25W Class A

    The 25 watt Speedster Deluxe™ raises the bar in the honored tradition of fine tube amplification. A single channel, single volume affair that is natural and simple to use. At low volume the tone is clean and very dynamic, great for hybrid picking or finger style techniques. When the amp is pushed, the beautiful break up echoes classic tones from a bygone era. The Speedster is a fine instrument that responds with sensitivity to your touch and everything in your signal chain. This allows the talent of the musician to convey their own distinctive musical intent.


    Model: Michael Soldano Signature
    Color: Hot Rod Yellow
    Knobs: Volume, Treble, Middle, Bass, Reverb, Bias

    Tubes: 2 x Fender 6V6 and 4 x ECC83
    Ohms: 16
    Watts: 25 Class A

  • Tech 21 Trademark 10


    8″ speaker
    Spring reverb
    14-1/2″W x 12-1/2″H x 7-1/2″D
    Additional features include: headphone and external speaker jacks
    Effects loop, and a Sansamp XLR direct out with cab simulator.
    Active EQ

  • THD Bivalve


    THD BiValve-30 30W Class A Amplifier Head
    30W Class A amplifier
    Single channel
    Hand built
    Accepts almost any preamp and power tubes in any combination
    Ships with 2 12AX7s (preamp) and 2 EL34s (power amp)
    More and Less inputs
    Volume, Treble, Bass, and Attitude knobs

  • Traynor Custom Valve 40 YCV40


    Auto-matching tube circuit maintains bias balance as tubes age ensuring hum free performance throughout tube life
    DC filaments on preamp tubes eliminate hum
    Fully regulated power supply with tube rectifier emulation
    Long Accutronics spring reverb
    Classic Celestion™ speaker
    All plywood enclosure
    Heavy gauge perforated grille with cloth cover
    Custom design “Chicken Beak” knobs

    Type: Tube Guitar Amplifier
    Cabinet Impedance (ohms): 8
    Power @ min. impedance: 40 Watts
    Minimum Impedance (ohms): 4
    Speaker Configuration: 12″/40 Watts
    Input Channels: 2
    Channel 1 – inputs: 1/4″ phone
    Channel 1 – controls: Gain, Volume, Treble, Bass, Middle
    Channel 1 – switches: Boost
    Channel 2 – inputs: Shares Channel 1
    Channel 2 – controls: Volume, Treble, Bass, Middle
    Channel 2 – switches: Channel Select, Brightness
    Master Volume Control: Yes
    Main Tone Controls: Presence
    Line Out (type/configuration): 1/4″ TRS/Rear (effects send)
    Effects Volume: Yes
    Effects Loop/Location: Yes/Rear
    Effects Footswitch/Function: Yes/Channel Select/Boost
    Internal Reverb/Effects: Spring Reverb
    LED Indicators: Channel/Boost/Power/Standby
    External Speaker Output/Location: 1/4″/Rear with internal speaker defeat
    Other Features: Standby Switch – Activates standby mode to keep the tubes warm while the amp is not in use; Auto Tube-matching Circuit; Preamp Tube – 3x Sovtek 12AX7WA Dual Triodes (Russia); Power Amp Tube – 2x Sovtek 6L6GB Beam Power Tubes (Russia); DC filaments on preamp tubes eliminate hum; Fully regulated power supply with tube rectifier emulation; Perforated Steel Grille
    Dimensions (D x W x H): 9.5″ x 23″ x 18″
    Weight: 47.2 lbs

  • Ultrasound 50 AG-50DS2



    2x25W stereo power
    2 – 8″ coaxial speakers
    2 channel operation (instrument and microphone)
    16 digital effects including stereo reverb
    Channel 1 controls: active bass and treble, mid-dip shape control, sweepable notch filter, and effects loop
    Channel 2: XLR input, active bass and treble EQ
    Headphone out
    XLR DI out
    Mono and stereo line outs
    18″ W x 13″H x 11″D
    24 lbs.


    2 x 25W (50W stereo) power
    2 – 8″ coaxial speakers
    18″ W x 13″ H x 11″D
    24 lbs.

  • Ultrasound AG-50E



    Perfect extension for the AG-50DS2 amp
    50W power
    2 – 8″ speakers
    Line level input
    21″W x 16″H x 13″D

  • Vox Pathfinder 10



    Distinctive VOX looks and great VOX tone
    10 watts; 6.5″ speaker
    Clean/Overdrive switch
    Volume, Gain, Bass and Treble controls
    Line/Headphone processed output

  • Vox Pathfinder 15R


    Dimensions (W x H x D):
    396 x 400 x 193 mm
    (15-1/2 x 15-3/4 x 7-5/8 inches)
    • Weight: 8.0 kg (17.7 pounds)
    • Output Power : 15 Watts RMS into 8 Ohms
    • Speaker: Vox Bulldog (8”, 8 Ohm)
    • Inputs: Input jack, Footswitch jack
    • Outputs: Extension Speaker jack, Headphone jack,
    Line Out jack
    • Controls: Gain, Master Volume, Treble, Bass, Tremolo
    (Speed, Depth), Reverb (Only on Pathfinder 15R), Gain
    Boost on/off switch, Power on/off switch
    • Options: VFS-2 Dual Footswitch (for switching Boost &
    Tremolo functions on/off)

  • Vox Pathfinder P15SMR


    Output Power 15 Watts RMS into 8 Ohms
    Imputs: Imput Jack, Footswitch Jack
    Outputs: Speaker Out Jack, Headphone Jack, Line Out Jack, Footswitch Jack
    Controls: Gain, Volume, Treble, Bass, Tremolo, Reverb, Gain Boost On/Off Switch, Power On/Off Switch
    Dimensions: (WxHxD) 396x216x193mm/15.59×8.50×7.60 Inches
    Weight 6.0KG/26.46 Pounds
    Options: VSF-2 Dual Footswitch
    Impedance: 8 Ohms, 60 Watts Handling Capacity
    Speakers: 2 Vox Bulldog 10″ 16 Ohm, 30 Watts built by Celestial in England
    Dimensions: (WxHxD) 412x570x230mm/16.22×22.44×9.06 Inches
    Wight: 12.0 Kg/22.46 Pounds

  • Vox Valvetronix AD120VTH Amplifier Head


    Effects: 21 types (Drive: 10 types, Modulation: 5 types, Delay: 3 types, Reverb: 3 types)
    Programs: 32 (8 Bank x 4 Channel)
    In/Outputs: 2 x Guitar Input (High, Low), Stereo Loop Return, 1 x Headphone, Stereo Left & Right Line Out, Stereo Left & Right
    Tuner: Auto Chromatic Tuner [Measurement range: 27.5 Hz-2,093 Hz (A0-C7), Calib. A=438-445 Hz]
    Options: VC-4 Vox foot controller