Vintage Guitar and Bass Amplifiers For Sale

Showing all 14 results

  • Ashdown Peacemaker 40



    Input: Impedance 1M Ohm, Input range 100mV to 1V p-p
    Effects Return: Impedance 50k Ohms, Input level 0dBu nominal
    Effects Send: Impedance 10k Ohms, Level 0dBu nominal
    Bass, Middle, Treble: Traditional passive interactive tone control network provides classic guitar tonal adjustment
    Output Tubes: 4 x EL84 (6BQ5)
    Bias: Class ‘A’ auto-bias
    Output Power: 40 Watts RMS into 16 Ohms
    Power Requirements: 80 Watts @ rated supply voltage

  • Fender Acousticsonic


    Dual 40W amplifiers
    Dual 8″ foam-surrounded LF drivers
    HF tweeter
    Ideal for acoustic-electric instruments and vocals
    Mic and instrument channels have independent EQs
    Phase switch controls feedback
    String Dynamics control reins in harsh treble
    Phantom power on mic channel
    Line out lets you go direct to a mixer
    DSP effects
    Optional footswitch controls effects switching on both channels
    Tilt-back legs for better projection
    22-1/2″W x 16-1/2″H x 10-1/4″D
    43 lbs.

  • Fender Bandmaster SOLD

  • Holland Custom Acoustic Amplifier

    Custom Made
    One of A Kind
    Tube Power
    Hand Wired
    12″ Speaker

  • Holland Little Jimmi


    100% Hand Built
    50 Watts
    Speaker, 12″ Eminence Legend
    Point-to-point Wiring
    4 Preamp, 2 power & 1 rectifier tube
    1 Imput
    3 Band EQ with Separate Controls for Sweep & Presence
    Standard Preamp Volume Controls

    Beautiful, Clear, Warm Chimey Tone. Features Aircraft Aluminum with scratch resistant face plate. Crafted from select woods and dressed in a very durable high quality Tolex & high-quality tubes and speakers. New Old Stock Amplifier has never been sold.

  • Marshall TSL 100 Half Stack Amplifier


    TSL100: Tripple Super Lead New Old Stock
    3 independent channels with volume, EQ, and gain
    100W all-tube power
    Spring reverb
    Speaker emulation DI circuit
    2 effects loops
    4 — 12″ heavy-magnet drivers
    Slant-front cab
    Marshall excellence

  • Speedster Amplifier Michael Soldano

    Speedster Soldano Signed


    Michael Soldano Signature Speedster AD21000-PT Speaker and Cab Combo Amplifier in Hot Rod Yellow. Made in the USA Hand built, custom shop created, low serial number, signed by M. Soldano himself. This is a high end boutique amp, with an adjustable bias for either of the two 6V6s that power it. It’s rated at 25W Class A

    The 25 watt Speedster Deluxe™ raises the bar in the honored tradition of fine tube amplification. A single channel, single volume affair that is natural and simple to use. At low volume the tone is clean and very dynamic, great for hybrid picking or finger style techniques. When the amp is pushed, the beautiful break up echoes classic tones from a bygone era. The Speedster is a fine instrument that responds with sensitivity to your touch and everything in your signal chain. This allows the talent of the musician to convey their own distinctive musical intent.


    Model: Michael Soldano Signature
    Color: Hot Rod Yellow
    Knobs: Volume, Treble, Middle, Bass, Reverb, Bias

    Tubes: 2 x Fender 6V6 and 4 x ECC83
    Ohms: 16
    Watts: 25 Class A

  • Tech 21 Trademark 10


    8″ speaker
    Spring reverb
    14-1/2″W x 12-1/2″H x 7-1/2″D
    Additional features include: headphone and external speaker jacks
    Effects loop, and a Sansamp XLR direct out with cab simulator.
    Active EQ

  • THD Bivalve Head


    THD BiValve-30 30W Class A Amplifier Head
    30W Class A amplifier
    Single channel
    Hand built
    Accepts almost any preamp and power tubes in any combination
    Ships with 2 12AX7s (preamp) and 2 EL34s (power amp)
    More and Less inputs
    Volume, Treble, Bass, and Attitude knobs

  • Ultrasound 50 AG-50DS2



    2x25W stereo power
    2 – 8″ coaxial speakers
    2 channel operation (instrument and microphone)
    16 digital effects including stereo reverb
    Channel 1 controls: active bass and treble, mid-dip shape control, sweepable notch filter, and effects loop
    Channel 2: XLR input, active bass and treble EQ
    Headphone out
    XLR DI out
    Mono and stereo line outs
    18″ W x 13″H x 11″D
    24 lbs.


    2 x 25W (50W stereo) power
    2 – 8″ coaxial speakers
    18″ W x 13″ H x 11″D
    24 lbs.

  • Ultrasound AG-50E



    Perfect extension for the AG-50DS2 amp
    50W power
    2 – 8″ speakers
    Line level input
    21″W x 16″H x 13″D

  • Vox Pathfinder 10



    Distinctive VOX looks and great VOX tone
    10 watts; 6.5″ speaker
    Clean/Overdrive switch
    Volume, Gain, Bass and Treble controls
    Line/Headphone processed output

  • Vox Pathfinder 15R


    Dimensions (W x H x D):
    396 x 400 x 193 mm
    (15-1/2 x 15-3/4 x 7-5/8 inches)
    • Weight: 8.0 kg (17.7 pounds)
    • Output Power : 15 Watts RMS into 8 Ohms
    • Speaker: Vox Bulldog (8”, 8 Ohm)
    • Inputs: Input jack, Footswitch jack
    • Outputs: Extension Speaker jack, Headphone jack,
    Line Out jack
    • Controls: Gain, Master Volume, Treble, Bass, Tremolo
    (Speed, Depth), Reverb (Only on Pathfinder 15R), Gain
    Boost on/off switch, Power on/off switch
    • Options: VFS-2 Dual Footswitch (for switching Boost &
    Tremolo functions on/off)

  • Vox Pathfinder P15SMR


    Output Power 15 Watts RMS into 8 Ohms
    Imputs: Imput Jack, Footswitch Jack
    Outputs: Speaker Out Jack, Headphone Jack, Line Out Jack, Footswitch Jack
    Controls: Gain, Volume, Treble, Bass, Tremolo, Reverb, Gain Boost On/Off Switch, Power On/Off Switch
    Dimensions: (WxHxD) 396x216x193mm/15.59×8.50×7.60 Inches
    Weight 6.0KG/26.46 Pounds
    Options: VSF-2 Dual Footswitch
    Impedance: 8 Ohms, 60 Watts Handling Capacity
    Speakers: 2 Vox Bulldog 10″ 16 Ohm, 30 Watts built by Celestial in England
    Dimensions: (WxHxD) 412x570x230mm/16.22×22.44×9.06 Inches
    Weight: 12.0 Kg/22.46 Pounds